Riding with Studs
Inherent ice, snow and mud is any variety of slippery conditions. When riding, please use your cautionary judgement regarding safety for you, your horse, and others around you. You should know how your horse will react to being ridden in these types of conditions. Always be cautious when making the decision to go for a snowy ride to ensure everyone gets through the winter safely without injury and can look forward to enjoying the warm sunny rides in the months ahead.
Be sure your boots fit well, before trying them with studs.† Legs, hoofs, pasterns and coronets can be destroyed by the use of studs. Be diligent. Be careful. Do not use studs on one boot and not the other. Horses need balance. Do not turn horses out with studded boots on. Playing around can tear up their legs.† And keep yourself out of the way too. Getting stepped on by a studded hoof is not pleasant. If you are drilling into older boots, please ensure that the stud tread does not extend past the sole of the boot. Boots that are worn down may have a thinner sole and the placement of studs becomes very important. Please use your own thoughtfulness and best judgement.† Always be aware that you have studs in the boots and do not ride in them when they aren't needed.
Pre-drill 1/8 inch locator holes with a 3/16 inch drill bit. Lock stud into position on the end of the NEW AND IMPROVED tool. Position end of the stud tread over the drilled hole and slowly drill the stud into the sole tread until the base of the stud head touches the sole. ITíS THAT SIMPLE!
Use caution when using studs with SPORT Boots as the sole tread is thinner than Simple Boot. Studs may penetrate through when applying studs to used Sport boots with worn soles.